Archive for the ‘Question Paper’ Category

Storage Management Training Test paper at Ethical Hacking Tuition Center Jaipur

Total Marks=200          Pass Marks=150          Total Question=20    Duration=2.5 hrs

 

A group of 5 students are assigned this task to perform combined in 2.5 hrs.
students have to make Video of each lab separately and will be submitted at the end.
LVM  RAID LOOP-DEVICES PARTITION CONFIGURATION LAB QUESTION:

 

1.Create and configure Software RAID-0 to increase the I/O operation of your disk
over lvm.

2.Configure DISK MIRRORING USING RAID having 4 active devices and 2 spare devices.

3.How to create,use and destroy swap partition in Redhat linux created over loop device?

4.How to create,use and destroy swap file in linux created over lvm which has redundancy support?

5.How to create a loop device and use it as a storage device by creating a file system over it?

6.How to create RAID-5 over LOOP device such that raid have 6 active devices and 2 spare devices?

7.How to create LVM over LOOP device with no redundancy but higher performance?

8.How to increase swap performance?

9.How to provide redundancy to swap memory?

10.How to partition RAID devices?

11.How to provide redundancy to LVM?

12.How to increase the performance of LVM?

13.How to configure swap partition ad swap file both over LVM?

14.How to provide both performance and redundancy to a swap memory?

15.how to configure RAID6 don’t forget to mention the diagram and data distribution system.

16.how to configure RAID10 over LVM which each logical volumes are created over different volume group?

17.How to configure RAID01 over lvm such that volume group is created by merging two different volume group and which physical volumes are created over loop devices?

18.Configure RAID5 over LVM and then grow the size of LVM to increase the RAID size?

19.Create encrypted RAID ,LVM and SWAP during Linux Installation time. 

20.Explain stepwise  working principle of Software RAID1 along with its configuration.Don’t forget to mention how to fail, stepwise remove and add a disk to RAID1 devices.And also show how to delete a RAID Array completely stepwise.

 

Advertisements

IPv6 Lab Practice Question

Posted: April 21, 2017 in Question Paper

IPv6 Test Paper

(ETHICAL HACKING TUITION CENTER JAIPUR)
Total Question 1           Total Marks:200           Pass mark:50

Question1.

user hemendra seating on a pc and in same network there is a FTP server,But when hemendra wants to visit the web server which is in Deepit network,  hemendra have to first go through 2002::1 interface then 2000::2 then 3000::2 then 4000::2 then 5000::2 then 6000::2 and then finally he reach the web server 2004::2
There is also a user rahul who is seating on pc 2003::2 and when he wants to go to FTP server he has to go through 2003::1 then 3000::1 then 2000::1 and then FTP server 2002::2
But when rahul wants to vist web server he has to go through 2003::1 then 4000::2 then 5000::2 then 6000::2 and then he reach web server.
When user deepit see there are two more people(pc) in rahul network deepit has decided to block other two users from accessing web server http port but allow rahul to access web server https port only. Deepit also decided to allow hemendar pc to access web server http and https port  but blocked FTP server to access web server http and https port.
After watching all this user hemendar decided to block rahul user to access ftp server but allowed other two users in hist network to access ftp server.Hemendar also decided to allow only deepit pc to ftp but blocked other pc and server in his network to access ftp server.
note:All users have atleast two routers in this lab.
atleast one router of each user configured with telnet and excpet hemndar,rahul and deepit no other PC or Server can telnet to any router.

Hint:Total network 8
It’s a multiuser Lab

http port 80

https port 443

CCNA theory question Paper at ETHICAL HACKING TUITION CENTER JAIPUR
TOTAL MARKS:1000                      PASS MARK:800                     TOTAL QUESTIONS:70

(more…)

Here i am going to write a list of Linux Admin Interview Questions.If you are reading this article I will request you to add more questions to it using comment sections and if possible also  write correct answers of these questions,In this way you can help thousands of  people who are trying to start their career in linux admin field.

What is vps?
What is mbr?
boot process of linux?
How to check ram in cache?
What is difference between symmetric and asymmetric encryption?
What is ip?
difference b/w shell and terminal?
Why linux is secure?
Why we use samba?

(more…)

Linux Security Test Paper-2

Posted: March 17, 2015 in Question Paper
LINUX SECURITY TEST PAPER SET-2

[1]What actually rule is specifying? 12*5=60Marks
#iptables -t filter -A INPUT –S 172.24.0.0/24 -j ACCEPT
# iptables –t filter –A INPUT –s 192.168.0.1 –p tcp --dport ftp –j DROP

# iptables -t filter –A OUTPUT –d 10.0.0.11 –p icmp –j DROP (more…)

LINUX SECURITY TEST PAPER:Module-1

TEST YOUR LINUX SKILL BY SOLVING THIS PAPER.
We also welcome you to suggest few questions to enhance this test paper.

[1]What actually rule is specifying?

(more…)