ccna training


ccna online and classroom training

CCNA Training Modules:

Module 1: Networking Basics and Network Fundamentals

Introduction to computer Network

OSI Model Explanation and Understanding

TCP/IP Model and Internet

Introduction to Cisco Packet Tracer

Understand Network Topology

Understand wires and cables used in networking

Difference between Hubs- switches and Routers

IP Address brief

Types of Address

IPV4 addressing

binary conversion

subnetting Class C

subnetting Class B

subnetting Class A

Network Architecture and characteristics of network topology

2 tier

3 tier

Spine-leaf

On=premises and Cloud

small office/home

LAN MAN WAN SAN

Compare Physical Interfaces and cabling types

Single Mode fiber

Multi Mode Fiber,copper

Connections(Ethernet,Shared media and Point to Point)

Concept of PoE

network devices

Single

Routers

L2 and L3 switches

Next Generation firewalls

Access Points

EndPoints

 

Servers

understand DHCP server working

Understand DNS Server working

Understand FTP Server working

Understand SMTP and POP3 Server working

Understand NTP Server working

Understand HTTP and HTTPS Server working

Understand Syslog Server working

DHCP DNS FTP HTTP SMTP POP3 combined LAB

 

Module 2: Router Components

 

Components of routers

RAM NVRAM and FLASH Memory

Introduction to cisco IOS

IOS Modes on Cisco Devices

User EXEC mode

Privileged EXEC mode

Configuration mode

Interface Configuration mode –     Router(config-if)#

• Line Configuration mode –         Router(config-line)#

• Router Configuration mode –     Router(config-router)#

Enable Passwords

Line Passwords and Configuration

assign an IP address to an interface:

Assign secondary ip address on an Interface

Router(config-if)# ip address 192.168.1.1 255.255.255.0

Router(config-if)# ip address 192.168.1.2 255.255.255.0 secondary

Managing Configuration Files

.running-config

• startup-config

view the contents of the running-config and startup-config files

delete the contents of the startup-config file:

change the hostname of your router

assign a description to an interface for documentation purposes

create a banner message which users will see when logging into an IOS device

 

Module 3: Routing

Need of routing

Routing Configuration

Routing very basic Lab

Static Routing Configuration

Default Routing Configuration

Static with Default Routing with configuration

Router Loopback Interfaces

Dynamic Routing

Difference between Static and Dynamic routing

RIP Routing Configuration

RIPv1 and RIPv2

EIGRP Configuration Lab

EIGRP configuration with same AS value

EIGRP Configuration with different AS Value

OSPF Configuration basic Lab

OSPF configuration with single AREA

OSPF Configuration with Multi Area or Multi Area OSPF Lab

Router as a DHCP server

Router as a DHCP Client

Router as a Multiple DHCP Server

 

 

Module 4: SWITCHING

 

Switch Basics

Assign IP Address on Switch

Gateway IP on Switch

VLAN creation and Deletion on SWITCH

VTP

Multi user Lab using SWITCH

Telnet Configuration on switch

SSH configuration on switch

SWITCH SECURITY

enable password on switch

enable secret on switch

service password-encryption

 

Module 5: WANs

Basics of WAN

PPP

PAP configuration

CHAP configuration

ACL Configuration Lab

NAT configuration Lab

Troubleshooting Routing protocols

Removing IP Address from router Interfaces

Remove wrong Routing Configuration From router

Router Configuration Backup  and Restore using TFTP Server

Router IOS Upgrade using TFTP server









ccna training

Advertisement