Archive for March, 2019


How to configure Telnet server on Custom Port. Or you can say how to configure secure telnet server. Secure in the sense it is binded with a different port rather than telnet default port and so it become more difficult to hack or even port scanning tool or service scanning tool like nmap can’t scan it properly.

Our Telnet Server Machine is 192.168.225.38 and as we know by default Telnet works on PORT Number 23 but here in this lab we are going to run Telnet Service on a PORT 9898 which is a custom port and we have to tell the Linux Machine about this unknown Port.

Also Learn:

How to configure Telnet Server on Linux Machine.

(more…)

Advertisements

Learn to configure Telnet Server on redhat enterprise Linux Machine. Telnet is a remote Login Program. You can Divide Telnet in to Two parts: Telnet-Server and Telnet-Client. Telnet server is the Machine which allows users to login to it through remote and the machines which are logged in remotely through telnet on Telnet Server is known as Telnet Client.For this lab I have taken three Machines here. One RHEL5 machine as Telnet server and other two machines as a telnet client.

Also Learn: How to Configure Telnet server on Custom PORT

telnet server

(more…)


Learn to configure Proxy Server for your Web Server using xinetd. We are going to learn how to configure proxy server for any Web Services using xinetd in Linux. Here in this Article The Proxy Machine I have used is a RHEL5 Machine and I will show you in just few simple steps that how easily you can configure a Proxy server on your RHEL5 machine using XINETD.

(more…)


Linux Administration Test at ETHICAL HACKING TUITION CENTER

TOTAL question 1    Total Marks=100    PAss Marks=80

This is an open Test it means you can use Internet Friend and even any faculty even Notebook or Books.

 

Question: There are total 4 Machines Used in this Lab. If You want you can use More Than 4 Machines.

There will be Total 3 Linux Machines(RHEL) and 1 Windows Machine(Windows xp/7/8/10 or Server)

 

Users have to design flow chart Diagram with data distribution and coding inside PAINT for RAID 60, RAID100,RAID 01 and RAID 51

 

Note: You can’t use everything software,your gmail or hotmail id,usb device or any external hard disk to transfer this file from Windows Machine to Linux.

 

Linux Server 1 have NFS Server,TFTP Server,SSH Server

Linux Server 2 have samba server,HTTP Web server and Telnet server

Linux Server 3 have FTP server and Mail server

 

Linux Server1 is acting as a telnet proxy server for Linux Server 3 and Linux Server 3 acting as a telnet proxy server for Linux Server 1.

 

For Windows machines both Linux server 1 and Linux Server 3 acting as a Telnet Proxy.

 

four Different Websites hosted on Web server ,each for every user. And Each users have to design their website on their own machine and then anyhow they have to send it to web server.

 

All websites folders are shared through SAMBA to all other Linux server machines.

On Mail Servers Four users created such that each users can login and send email to each other.

 

The Data on NFS server is synced with TFTP server and hence with Windows Machine.

 

The data inside NFS Server will be the configuration notes of TFTP and Telnet Proxy of Linux Machine 1.

The data on NFS Server get protected through RAID-1 and that RAID-1 is supported by loop devices attached with file a and b.

 

Apache Web servers data getting redundancy with Flexibility.

Each Users website have Different size support.(means each users web folders have different size with redundancy.)

 

Note: File a and b which is connected with loop devices is actually inside TFTP server Directory.